We attributed much
of them to the five front spars of the wings and on a
sheet of cross-barred paper I at once drew the design for
a new three-decked machine to be built by Mr. Herring.
Being a builder of bridges, I trussed these surfaces
together, in order to obtain strength and stiffness. When
tested in gliding flight the lower surface was found too
near the ground. It was taken off and the remaining
apparatus now consisted of two surfaces connected together
by a girder composed of vertical posts and diagonal
ties, specifically known as a "Pratt truss." Then
Mr. Herring and Mr. Avery together devised and put
on an elastic attachment to the tail. This machine
proved a success, it being safe and manageable. Over
700 glides were made with it at angles of descent of 8
to 10 degrees, or one in six to one in seven.
First Proposed by Wenham.
The elastic tail attachment and the trussing of the
connecting frame of the superposed wings were the only
novelties in this machine, for the superposing of the
surfaces had first been proposed by Wenham, but in
accordance with the popular perception, which bestows
all the credit upon the man who adds the last touch
making for success to the labors of his predecessors, the
machine has since been known by many persons as the
"Chanute type" of gliders, much to my personal gratification.
Pages:
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33